kbertens wrote:
I had this problem before and a reinstall did the job. The problem is probably within the processing engine, maybe have a look if it is running on the local port.
Next week i could send you some screenshots if you would.
You dont need the safe to process evidence.
I reinstalled once, and same thing. If you can send some screenshots, that'll be helpful
athulin wrote:
And there are no system log entries of errors or other problems? (Have you checked that you do get logs from platform problems?)
If you look at resource monitor when you run these jobs, ... do you see that data is read/written for a while, and then stop? Or is it a sudden death failure, as soon processing starts?
Does anything else fail? Say, if you run something like Burnin Test, or SiSoft or similar load-generating or benchmarking test? Or is it only EnCase that produces this behaviour?
Do you have a sound platform for EnCase to work on? Power OK? Memory OK? Disks OK? File system OK? Cooling adequate?
When I look at the processor manager, it shows it at 0% majority of the time, then moves up and to aroun 80-99%(varies), then "job failed"
I believe everything is ok with my workstation, since I am able to run FTK and other forensic software on it.
↧